how to cut hole in ceramic sink for tap

People also ask


  • How do you cut a hole in a kitchen sink?

  • A quick step by step on how to cut a hole in a kitchen sink when working with stainless steel. Note, this is for a mixer tap which requires one hole. Includes video to follow along. 1. Decide the best place for your tap 2. Use the mounting underplate piece to position it, then mark with a drill bit where the screw holes lie.

  • How to knock a tap hole in a ceramic sink?

  • How to Knock a Tap Hole in a Ceramic or Granite Sink. 1 Step 1. Check Your Sink. First remove the sink from it’s original packaging and inspect the sink, ensure there are no visible signs of an faults … 2 Step 2. Identify Tap Hole Positions. 3 Step 3. Preparing The Sink For Knocking Through. 4 Step 4. Knocking Through The Tap Hole.

  • What size drill bit for a double ceramic sink?

  • I have a large double ceramic sink with a triangular space between the sinks that in images of the same sink I’ve seen a tap fitted. This sink does not have a ‘knock out’ so needs to be drilled and the thickness is approx 20mm. The hole will need to be 30-32mm diameter.

  • How do you drill a hole in a granite sink?

  • Place the ceramic or granite kitchen sink upside down on a saw horse or similar where a drill can pass through without damaging the surface below, ensuring you place some cardboard or towel under the sink to ensure it from been scratched or marked.

    Leave a Reply

    Your email address will not be published. Required fields are marked *