how to drill ceramic vase

Best answer


Turn your vase upside down. Start drilling a hole in the center of the base. A ceramic ginger jar was used for this project, so the hole was drilled in the center of the lid. It is best to start drilling the hole at an angle to create a groove.

People also ask


  • How to drill a hole in a ceramic pot?

  • The first thing you want to do is determine the right bit to use for your ceramic pot. A masonry bit works best for ceramic but you can always use a diamond bit. Using the wrong bit can compromise the quality or even the accuracy of your hole. Next, you want to insert a inch bit into the drill and spread a newspaper on a flat surface.

  • Can you drill out the bottom of a vase?

  • While the vase’s opening naturally accommodates the rod and fixture, you’ll have to drill a hole to run a lamp cord out of the bottom side of the vase, but you can’t use just any bit to drill through porcelain. Clean the surface of the vase thoroughly.

  • What kind of drill bit do you use for a vase?

  • Equip your electric drill with a carbide-tipped masonry drill bit. Use a size suited to the diameter of the electrical cord you plan to run through the vase. 5 Set the drill to a low speed setting.

  • Can you use a regular drill bit on ceramic?

  • Glazed ceramic, which is what most store-bought pots are, will make it hard for the bit to 鈥済rab on鈥?to the pot to start drilling the hole. Additionally, even if you can get through the exterior, if you use a regular drill bit on a ceramic pot you run a greater risk of cracking the pot.

    Leave a Reply

    Your email address will not be published.